Hand drawn Abstract Vintage Rose Wallpaper Mural 9'X (8'/12'/16') collect by Uneelives. Bump painting strokes, huge petals make the wall look more impactful
Why only three size ?
Uneelives studio team and most of the designer choose those three size for each wall, and fixed size wallpaper can save a lot of time and unnecessary hassle. That's why our price is low, we save you money on the extra size mural.
Why choose Uneelives wall mural ?
High-quality satin imported from Germany perfectly fits all wall needs. This fabric has good water resistance, simple care, and smooth surface texture. Also can be perfectly combined with printing
Most of the wallpaper glue will be dissolved by water, which makes it easier for us to remove the wallpaper. Or you can use other professional wallpaper remover. After the glue is dissolved, you will find that it is easy to peel off from one corner and will not damage the wall at all.
*Please check the adhesive instructions to ensure that it will not cause damage to the mural or find some professional to do it.
FREE shipping to Canada 5-7 business days.
order today and expect to receive your mural about 5-7 business days.
*Free shipping is available on all orders over $80.
Tips for installing your mural
Wall murals are a great way to transform your room, quickly and easily. For ease, we recommend 2 people install the mural onto your wall.
All wall murals are supplied in even panels to ensure installation is as simple as can be.
your wall is supplied in panels,all panels are hung edge to edge.Trim excess at top,bottom and far left and right panels.
*We put extra 2-4 inch to the total width and height.
Excess can be trimmed from around the edge once your mural has been installed.
It’s important that you prepare your wall as blow:
We recommend that two people hang the wall mural together to help achieve the best results.
It is important that you follow the full installation guide that will be supplied with your wall mural.
To ensure that your mural has a long and healthy life, it's important to prepare the wall correctly before installation. Below is a quick guide to preparing your wall for your new mural.
Ensure that your plastered wall is clean and dry with no loose plaster or contaminants. Finish with a good quality seal/primer.
- Painted walls
If your wall is painted, we recommend that the mural is installed on matt emulsion paint only. Old, flaking paint will need to be scraped and sanded to a smooth surface. Finish with a good quality wall sealer/ primer. For freshly painted walls, allow 2 to 3 weeks drying time before installing your mural.
- Wallpapered walls
Remove any old wallpaper before installation and DO NOT use lining paper underneath your wall mural. Seal/prime before installation.
- Self-Adhesive Murals
Wall surfaces MUST be smooth, flat and free of flaky paint, dust or other containments, the final finish must be a primer/sealer. This material has a small amount of transparency, so primers other than white may show through slightly, depending on the colours contained within your mural print itself.
How to install a 'Paste the Wall' mural
Tools you will need to install your mural:
- Wallpaper adhesive
- Wallpaper Roller
- Tape Measure
- Spirit Level
- Sharp Knife
- Clean Cloth
1. Lay out your wall mural
Your wall mural will be supplied in panels. Lay the panels out in order and leave to rest for at least 5 hours. Make sure that you check over your mural carefully when you open it. Before application, sponge/ spray your prepared wall with water. It is recommended that you work left to right.
2. Draw a straight vertical line on your wall
Create a guideline using a spirit level and tape measure by drawing a straight line vertically, a panel's width in from the edge of the wall. Remember to deduct the measurement of the bleed/extra bit of paper. This will help you guide your panel into place to ensure it's applied straight.
3. Apply the wallpaper paste to the wall
Use a medium pile paint roller to apply the supplied paste to the wall, in the area the first panel will be installed. Apply the first panel to the pasted area and try not to squeeze any paste out of the edges. Make sure that you leave any extra bleed at the top, bottom and side for trimming later. Smooth a damp sponge or brush to gently smooth out any wrinkles or bubbles from the top of the panel to the bottom.
4. Match up the panels
Paste the wall before each panel. Apply the second and subsequent panels. Ensure that the pattern or image matches up as each panel is applied. Slide each panel into place, making sure they are edge to edge - without overlapping and without leaving any gaps. Smooth each panel with a damp sponge or brush after each application.
5. Trim any excess
When all panels have been installed, carefully trim the top, bottom and far left and right sides of your mural with a sharp blade. Use a damp sponge/brush to remove any excess paste.
*Please note that the full installation guide will be supplied with your wall mural shipping.
Have question about this mural ?
whether you need help placing your order or have a special design request, our designer team are ready to help you.
Please feel free to CONTACT US for any infomation.